Overview

Provisioning your Obihai ATA is a simple process. You will first need to reset the device to factory default settings. Then you will use the device's web GUI to provision your Obihai ATA.


Reset the Obihai ATA to Factory Defaults

Please factory reset the device before trying to provision the Obihai ATA.

  1. Connect your device using the ports on the back panel. You will need either an analog phone or a fax machine with an analog phone to get the device's IP address using the Phone port.
  2. Using a connected analog phone, dial * * * to access the device's IVR menu. (Note: After provisioning, dial * * * * to access the device's IVR menu.)
  3. Press 1 to retrieve the device's IP address.
  4. In a web browser on a computer on the same network as the phone, browse to the device's IP address.
  5. Log in using the following credentials. (Note: After provisioning, use the MAC password to log in to the web GUI.)
    • Username: admin
    • Password: admin
  6. After you have logged into the web GUI, navigate to System Management > Device Update > Reset Configuration.

  7. Check both Router Configuration and Voice Configuration options and then click Reset.
  8. Allow the device to reboot.
Check Firmware Version
  1. In a web browser on a computer on the same network as the phone, browse to the device's IP address.
  2. Log in using the following credentials. (Note: After provisioning, use the MAC password to log in to the web GUI.)
    • Username: admin
    • Password: admin
  3. After you have logged into the web GUI, navigate to Status > System Status.
  4. Under Product Information, locate the Software Version.
  5. If the firmware version listed is version 3.0.1 (Build: 5236) for 1 port, or 3.0.1 (Build: 5235) for 8 port, proceed to the steps to manually provision the Obihai ATA into production.
  6. If the firmware version listed is not version 3.0.1 (Build: 5236) for 1 port, or 3.0.1 (Build: 5235) for 8 port, upgrade the firmware version before moving on to manually provisioning the device.
Upgrade Firmware (If Needed)
  1. If a firmware upgrade is needed, download the appropriate firmware version: Obi508 or Obi300.
  2. In a web browser on a computer on the same network as the phone, browse to the device's IP address.
  3. Log in using the following credentials. (Note: After provisioning, use the MAC password to log in to the web GUI.)
    • Username: admin
    • Password: admin
  4. After you have logged into the web GUI, navigate to System Management > Device Update > Firmware Update.
  5. Click Choose File and select the downloaded firmware file from your computer.
  6. Click Update.
  7. Allow the device to reboot.
  8. Proceed to the next section.
Manually Provision the Obihai ATA into Production
  1. In a web browser on a computer on the same network as the phone, browse to the device's IP address.
  2. Log in using the following credentials. (Note: After provisioning, use the MAC password to log in to the web GUI.)
    • Username: admin
    • Password: admin
  3. After you have logged into the web GUI, navigate to Status > System Status.
  4. Under Product Information, see what version
  5.  Auto Provisioning > ITSP Provisioning > ConfigURL.

  6. Enter the provisioning link: https://obicfg.8x8.com/obihaiata/server.cfg;https://obicfg.8x8.com/obihaiata/${mac}.cfg;https://obicfg.8x8.com/obihaiata/${mac}-cust.cfg
  7. Click Submit.
  8. Click Reboot.
  9. Allow several minutes for the device to reboot and connect to the 8x8 servers. When rebooting is complete, continue on to activate your Obihai ATA.

Provisioning Server Link

https://obicfg.8x8.com/obihaiata/server.cfg;https://obicfg.8x8.com/obihaiata/${mac}.cfg;https://obicfg.8x8.com/obihaiata/${mac}-cust.cfg