In order to access the web interface of the Panasonic DECT wireless IP phone, Embedded Web must be turned on.

Activate Embedded Web

  1. On the handset, press the Menu soft key.
  2. Scroll down to highlight Setting Handset (wrench icon) and press Ok.
  3. Scroll down to Other Option and press Ok.
  4. Scroll down to Embedded Web and press Ok.
  5. Scroll up to On and press Ok.
  6. You will hear a longer beep if done correctly.

Note: This setting only remains in place for five minutes. If you need to access the GUI again, you will need to re-enable Embedded Web.

Access the Web GUI

  1. Ensure the base is plugged in.
  2. Obtain the handset's IP address.
    1. Press the Menu soft key.
    2. Scroll down to System Settings and press Ok.
    3. Scroll down to Status and press Ok.
    4. Scroll down to IPv4 Settings and press Ok.
    5. Scroll down to IP Address and press Ok.
    6. Note IP Address.
  3. Obtain phone password (if provisioned).
  4. On a computer on the same network as the phone, open a web browser.
  5. In the browser address bar, enter: https://<phone IP address> and press Enter.
  6. Log in with username admin and phone password (or password admin if phone is not yet provisioned).