Note: We highly recommend consulting an IT or network professional when configuring advanced network settings. If able, the network administrator should always check the IP address, and assign and log any static IP to avoid conflicts in the future.
Switching a phone from DHCP to a static IP can be a useful way to address connectivity issues like URL call is disabled errors. It may also alleviate some (but not all) call quality issues.
Before You Begin
- Find out your phone's password. Polycom phones in an unprovisioned, factory default state and NOT running UC4.0+ firmware should be able to utilize 456 or 123. Otherwise, use the MAC password.
- Next, determine the phone's current IP address and a static IP address (along with subnet and gateway) to assign to the phone.
To set a static IP on a Polycom phone through the phone's web GUI
The device web interface (GUI) allows you make changes to the phone's settings via a web browser on your computer, which can often be more convenient than on the phone screen itself. You must ensure that:
- The phone is plugged into the network.
- The computer is on the same network as the phone.
- In a web browser on a computer on the same network as the phone, browse to the phone's IP address.
- Log in as Admin and enter password.
- Click Settings > Network > Ethernet.
- Set DHCP to Disable.
- Enter all of the following:
- IP Address
- Subnet Mask
- IP Gateway
- For DNS Server, enter: 184.108.40.206
- For DNS Alt, enter: 220.127.116.11
- On the bottom right, click Save.
- Wait for phone to reboot. If it does not reboot, verify the information, then manually power cycle the phone (unplug it from the power source, wait a full minute, then plug it back in and let it power on).