Skip to main content

 

 
8x8 Support

How to Assign New Contact Center Channels to a Script or IVR

Objective

Assign new channels to a script.

Applies To

  • Contact Center Configuration Manager
  • Contact Center

Procedure

  1. Log in to Contact Center Configuration Manager as an administrator.
  2. Navigate to Home > Channels.
  3. Find the channel number in the list and ensure the Status is enabled.
  4. If the Status is disabled, click Edit_Button2.png on the right-hand side.
  5. Tick the box to enable the channel. Click Save.
    This channel is enabled.png
  6. Navigate to Home > Scripts.
  7. Click Edit_Button2.png on the script you want to assign the new channel to.
  8. On the Properties tab, click on Assign new channels_Button.png.
  9. Find the channel number in the list and tick the Assign box. You can assign up to 100 channels at a time.
    Assign_Tickbox.png
  10. Click Assign.
    Caution-Icon.png

    If you are assigning a channel that is already assigned to another script, when you click Assign a box will pop up to warn you that reassigning the channel will replace all previous scripts linked before. Be aware that reassigning the channel will remove it from the script it is currently assigned to and assign it to this new script. To proceed, click Yes.
    Replace all previous scripts linked_Warning.png

  11. The channel number will now show in the Assigned channels table.
  12. Click Save at the bottom.
  • Was this article helpful?