Skip to main content
8x8 Support

Valcom V-2000A Overhead Paging System Configuration

To configure a Valcom V-2000A overhead paging system, ensure that Battery Feed is off. Connect 8x8 adapter to the Tip and Ring connectors. Learn more.

Objective

Configuring a Valcom V-2000A overhead paging system for 8x8 services.

Applies To

Valcom V-2000A overhead paging system (FXS Mode Only)

Procedure

  1. Ensure that the Battery Feed is on.
    • In the on position this sets this as Station and or Loop Start Trunk (FXS Mode)
  2. Connect your 8x8 adapter to the the Tip and Ring as shown on the image below.

Valcom_2000A_Overhead_Paging.png

  • Was this article helpful?