Skip to main content


8x8 Support

Accessing the Web Interface for Panasonic DECT Phones


These devices have reached end of sale and support.


Accessing the web interface for Panasonic DECT phones.

Applies To

  • Panasonic DECT Phones


In order to access the web interface of the Panasonic DECT wireless IP phone, Embedded Web must be turned on.

Activate Embedded Web

  1. On the handset, press the Menu soft key.
  2. Scroll down to highlight Setting Handset (wrench icon) and press Ok.
  3. Scroll down to Other Option and press Ok.
  4. Scroll down to Embedded Web and press Ok.
  5. Scroll up to On and press Ok.
  6. You will hear a longer beep if done correctly.
Note-Icon.png Note: This setting only remains in place for five minutes. If you need to access the GUI again, you will need to re-enable Embedded Web.

Access the Web GUI

  1. Ensure the base is plugged in.
  2. Obtain the handset's IP address.
    1. Press the Menu soft key.
    2. Scroll down to System Settings and press Ok.
    3. Scroll down to Status and press Ok.
    4. Scroll down to IPv4 Settings and press Ok.
    5. Scroll down to IP Address and press Ok.
    6. Note IP Address.
    On a computer on the same network as the phone, open a web browser.
  3. In the browser address bar, enter: https:// followed by the IP address obtained above and press Enter. This will take you to the Web GUI login page.
  4. Log in with the following credentials. (If the phone is not provisioned, log in with username admin and password admin.)
    • Username: instoperatorid
    • Password: qgENGet4GQKQVVRyYXJm4LQL2NGVuhEtKzK3Gkz7LdWZFvtxB7CHdWkpkD9Q8WZt
  5. Upon successful login, you will have accessed the Web GUI.

Additional Information

If the above credentials do not allow you to log in, try the following:

  • Username: admin
  • password: adminpass