Skip to main content


8x8 Support

Changing the Display Name on Poly VVX


Change the display name on your Poly VVX series IP phone.

Applies To

  • Poly VVX Phones


Configure via Handset.

  1. Press the Home key.
  2. Using the scroll wheel scroll to the right until you find Settings.
  3. Scroll down to Advanced.
  4. Enter the handset's password. The default password is 456. Press Enter when you are finished
  5. Go to Administration Settings.
  6. Scroll down to Line Configuration.
  7. Scroll to Line 1.
  8. Select Display Name:.
  9. Using the keypad enter the new name you would like to have displayed.
    • Tip! You can use the Mode key to change between Abc, ABC, abc and 123. Press Ok when you are finished.
  10. Press the Back button twice.
  11. Scroll down to Save Config and press the Select button.
  • Was this article helpful?