Skip to main content

 

 
8x8 Support

Poly Headset Volume Locations

Objective

Find all the possible volume adjustment locations when using Poly Headsets.

Applies To

  • Poly CS5xx
  • Savi 7xx
  • Savi 8xxx

Procedure

Identify which headset is paired to the base and refer to numbered guide for details.

Headset2..png

Headset Numbered Guide

  1. Volume control [ Increase | Decrease ]
  2. Call control [ Call, Hold, End]
  3. Mute ( *Press volume button )
  4. Power Button
  5. Active Noise Cancelling

Identify which base is paired to the base and refer to numbered guide for details.

SAVI700.8200.Base.pngCS510.520.Base.png

Headset Base Numbered Guide

  1. Microphone Volume Control
  2. Speaker Volume Control
  3. Configuration Switch

Known Issues

  • Setting the Microphone Volume level(1) too high on headset base can cause echo while using the paired headset.
  • Setting the Speaker Volume level(2) too high on headset base will cause audio to sound muffled. 
  • Most phones work on Configuration Switch(3) position A, adjust this if you cannot hear the dial tone clearly.
  • There is a known issue with EHS and Poly VVX firmware 5.9.1.0615
  • Was this article helpful?