Skip to main content

 

 
8x8 Support

Valcom V-9970 Overhead Paging System Configuration for 8x8 Services

To configure a Valcom V-9970 overhead paging system for 8x8 services, ensure that the DIP Switches 1 and 2 are turned ON. Find the full list of steps here.

Objective

Configuring a Valcom V-9970 overhead paging system for 8x8 services.

 

Caution-Icon.png

Disclaimer:  8x8 is not Responsible for configuration or deployment of legacy 3rd party Paging devices, please consult the Original Equipment Manufacturer for support. 8x8 X Series does not support FXO 3rd party devices

Applies To

Valcom V-9970 overhead paging system

Procedure

  1. Ensure that DIP Switches 1 and 2 are turned ON.
  2. Using the phone line or RJ11 cable, connect your 8x8 adapter to the J2 Port of the Valcom V-9970.
  3. Connect the speaker to the Pins labeled Page Out.

Valcom V-9970 DIP-Switches.png

  • Was this article helpful?