Skip to main content

 

 
8x8 Support

Transferring Calls Using a Poly Handset

Objective

Completing one of three types of call transfer: warm transfer, blind transfer, or transfer to voicemail.

Applies To

  • Poly phones

Procedure

Warm Transfer

The warm Transfer is where you speak to the user of the extension you are transferring the call to, useful for telling the user who is calling.

  1. While on a call, press the Transfer key.
  2. Enter the desired extension number.
  3. Wait for them to answer, speak to them, and give details to make sure the call is answered.
  4. Hang up/Transfer.
eye.png Tip:
It is always a good practice while doing a warm transfer always talk to the end user or stay on that call for minimum 10 seconds and then hit the transfer button if you just press transfer and then transfer again calls may get lost or call may even drop.

Blind Transfer

Blind transfer is where you transfer the call straight to the intended destination. When there is no need to speak to the other person it goes straight to ringing their phone.

Method 1

  1. While on a call, press Transfer.
  2. Press Blind.
  3. Enter the desired extension number.
  4. Hit Send.

Method 2

  1. While on a call, press More twice.
  2. Press BlindTrfer.
  3. Enter the desired extension number.
  4. Press Send.

Transfer to Voicemail

Transfer to voicemail lets you transfer the caller straight to the voice mail of another extension. Useful if you know the user is away from their desk.

  1. While on a call, press More twice.
  2. Press xfrVM.
  3. Enter the desired extension number.
  4. Press Send.

Additional Information

It is always a good practice while doing a warm transfer always talk to the end user or stay on that call for minimum 10 seconds and then hit the transfer button if you just press transfer and then transfer again calls may get lost or call may even drop.

  • Was this article helpful?