Skip to main content

 

 
8x8 Support

How to Provision Phones Not Provided by 8x8 in 8x8 Express

Objective

Provision phones not provided by 8x8 in 8x8 Express.

Applies To

  • 8x8 Express
  • Third-Party Devices

Procedure

Note-Icon.png Note: Accommodation of devices not purchased from or originally provisioned for service by 8x8 is on a commercially reasonable effort basis. These devices are not guaranteed to be supported on 8x8 service.

Are you activating phones not provided by 8x8?

In order to work on the 8x8 service, these phones will need to:

  1. Be supported models on compatible firmware.
  2. Have a valid factory-installed device certificate.
  3. Have our server address programmed in so they can reach our servers.

Before you try to activate your phones on 8x8 service, click here to make sure the model and firmware are supported.

Once you have confirmed that your device is compatible with the 8x8 service, follow the guides below to configure it to use our service.

Note-Icon.png Note: The below guides are for phone system administrators. If you are not the person responsible for setting up and maintaining your company's 8x8 phone system, you may not be able to complete all of the steps below.

Provisioning Guides by Manufacturer

Poly VVX and SoundPoint IP Phones

Knowledge Base Article: How do I manually provision a Poly phone using the phone's Web GUI?
Poly SoundPoint IP 550 Video Guide: https://www.youtube.com/watch?v=XrBm-0ZQSrY
Poly SoundPoint IP 335 Video Guide: https://www.youtube.com/watch?v=SmceSLlSP9k

Cisco SPA IP Phones

Step-by-Step Guide: Cisco SPA IP Phones: How do I provision my phone for use on 8x8 service?
Cisco SPA IP Phones Video Guide: https://www.youtube.com/watch?v=mzZCdGJMxKY

  • Was this article helpful?