Skip to main content
Setting up Cross-PBX dialing in Virtual Office Configuration Manager
8x8 Support

Setting up Cross-PBX dialing in Virtual Office Configuration Manager

Objective

Setting up extension-to-extension dialing between PBXs.

Applies To

Virtual office Configuration Manager accounts with multiple PBXs

Procedure

  1. Log in to VO Configuration Manager.
  2. Select Company.
  3. Locate List of PBX(s) at the bottom of the page.
  4. Next to one of the PBX names, select the pencil icon. 
  5. In the box that appears, type the desired numerical dialing code.
  6. Press Save.
  7. Repeat steps 4 through 6 for each PBX.

Note: All PBX dialing codes within an account must be unique.

Dialing with PBX Codes

The scenarios below explain how you would dial extension 1001 with a PBX code of 22 on your account.

Scenario

Dialed Extension

Within the same PBX 1001
Between different PBXs 221001
Between different 8x8 accounts Not supported, you must use the extensions DID
Dial by extension through an auto attendant 1001