The following codes apply to the Cisco SPA 122 ATA analog phone adapter.
Please note that dialing an unsupported code may result in an Internal Server Error. If this happens:
- Hang up the phone.
- Lift the receiver or initialize the speakerphone.
- Dial * 6 8.
Cisco SPA ATA Adapters Star Commands
|* Code||Description||8x8 Supported?|
|56||Enable call waiting.||Yes|
|57||Deactivate call waiting.||Yes|
|67+DID||Make an anonymous call.||Yes|
|68||Removes caller ID blocking on all outbound calls.||Yes|
|69||Return last call received.||Yes|
|72||Forward all calls.
Dial *72, wait for the tone, dial number calls will be forwarded to, then wait for confirmation beep.
|73||Remove Forward All Calls.||Yes|
|77||Block all anonymous calls.||Yes|
|87||Removes blocking of all anonymous calls.||Yes|
|92||Forward No Answer.*||Yes|
|93||Remove Forward No Answer.*||Yes|
*Requires that your PBX's (phone system's) No Answer Forward rule be set at a duration longer than 3 rings (preferably, 25 seconds). If your phone system is generally set to pick up voicemail after 15 seconds, that setting will always take priority over what is entered directly on the phone.