Your Polycom phone has been activated, but still displays an Inactive message.
Polycom IP phones
Update the Config File
In most instances, updating the config file on the phone will help resolve this issue.
- On the phone, go to Menu > Settings > Basic > Update Configuration.
- Select Update Configuration.
- The phone should reboot after the update.
If this does not resolve the issue, move on to further troubleshooting.
- Disable SPI/firewall and/or SIP-ALG on the router, which could prevent the phone from coming online.
- Try changing the Boot Server to Static in the phone's web GUI.
- In web GUI navigate to Settings > Provisioning Server > DHCP Menu > Boot Server.
- In the drop-down menu, select Static.
- Click Save.
- The phone should automatically restart, but if it does not, restart the phone manually.
- Try using an open/public DNS (22.214.171.124 or 126.96.36.199) as the primary DNS on the phone.
- Remove any devices from the PC port and power-cycle the phone.
- Power-cycle the network.
This problem is most likely due to one of the following issues.
- Server address error.
- Network setup.