How to Configure a Poly RealPresence Trio 8800 to a Wi-Fi Network
Objective
Configure a Poly RealPresence Trio 8800 on a Wi-Fi network.
Applies To
- Poly RealPresence Trio 8800
Procedure
Enabling Wi-Fi automatically disables the Ethernet port. You cannot use Wi-Fi and Ethernet simultaneously to connect Poly Trio 8800 system to your network. When you connect to your network over Wi-Fi, only audio-only calls are available.
Enable Wi-Fi on the Poly Trio 8800 System
- Go to Settings > Advanced.
- Enter the MAC Password. (If not yet provisioned use the default password 456. If the phone has been provisioned, use the MAC password.)
- Go to Administration Settings > Network Configuration > Network Interfaces > Wi-Fi Menu, and turn Wi-Fi On. The phone restarts.
- When the phone completes restart, go to Settings > Advanced.
- Enter the MAC Password.
- Go to Administration Settings > Network Configuration > Network Interfaces > Wi-Fi Menu to view available networks.
- Select a network you want to connect to and press Connect.
Configuring Wi-Fi
The parameters you configure depend on the security mode of your organization and whether or not you enable DHCP. Poly Trio 8800 system is shipped with a security-restrictive worldwide safe Wi-Fi country code setting.
The Poly Trio system supports the following Wi-Fi security modes:
- WEP
- WPA PSK
- WPA2 PSK
- WPA2 Enterprise
The Poly Trio 8800 system supports the following wireless modes:
- 2.4 GHz / 5 GHz operation
- IEEE 802.11a/b/g/n radio transmission standard
Additional Information
How do I get device information and passwords?
For any additional information see Poly documentation here.