Skip to main content
Manually Provisioning a Yealink T23P or T46G Phone
8x8 Support Knowledge Base

Manually Provisioning a Yealink T23P or T46G Phone

Follow the instructions below to manually provision a Yealink T23P or T46G phone. Please note that it is best practice to perform a factory reset when manually provisioning a phone.

Provisioning a Yealink T23P Phone

  1. On the phone, go to Menu > Settings > Advanced Settings.
    • Use admin or the MAC password when prompted for a password. Change Password mode from abc to 2aB, especially when entering MAC password.
  2. Select Reset to Factory. The phone should now reset to factory default settings.
  3. Once the phone reboots, go to Menu > Settings > Advanced Settings.
    • Password: admin
  4.  Select Auto Provision. Enter the provisioning server address: https://ylcfg.8x8.com/yealink 

Note: For ":" or "/" enter the * key multiple times.

  1. Press Save and click OK to confirm.
  2. The phone will auto-restart after 20 seconds, or you can restart the phone manually at any time.
  3. If the phone was previously activated, it should come online. If not, move on to the next step and activate the phone.

To activate your phone

  1. Enter the Activation Code.
  2. The phone will auto-restart after 20 seconds, or you can restart the phone manually at any time.

Provisioning a Yealink T46G Phone

  1. Go to Menu Advanced > Reset & Reboot.
  2. Select Reset to Factory.
  3. Under Reset Option press Full Reset.
  4. Click OK. The phone should now reset to factory default settings.
  5. Go to Menu > Advanced once the phone resets.
    • Password: admin
  6. Select Auto Provision. Enter the provisioning server address: https://ylcfg.8x8.com/yealink

Note: For ":" or "/" enter * key multiple times.

  1. Press Save and click OK to confirm.
  2. The phone will auto-restart after 20 seconds, or you can restart the phone manually at any time.
  3. If the phone was previously Activated, it should come online. If not, move on to the next step and activate the phone.

To activate your phone

  1. Enter the activation code.
  2. The phone will auto-restart after 20 seconds, or you can restart the phone manually at any time.