Skip to main content

 

 
8x8 Support

How to Change Default Speed Dial on Yealink DECT Phone

To change the default speed dial setting in Yealink handset, press ok to access the menu on Yealink DECT Handset, then navigate to menu. Learn more here.

Objective

Changing the default speed dial setting on a Yealink DECT phone.

Applies To

Yealink DECT phones

Procedure

Your Yealink phone comes with a pre-configured speed dial that points to the system voicemail. This setting is changeable in the phone's web GUI.

  1. On the Yealink DECT handset, press OK to access the menu.
  2. Go to Menu > Status > Base.
  3. Note the IP address of the base unit.
  4. In a browser on a computer on the same network as the phone, navigate to the phone's IP address.
  5. Log in to the DECT web GUI using the IP address obtained in step 3.
  6. Go to Phone > Line1 > Voicemail.
  7. Remove 555 and enter the desired speed dial number.
  8. Click Confirm.
  9. Repeat steps 6 through 9 for each line in use.

Where to change speed dial.png

Additional Information

Please note that there is a chance that these settings will be overridden if the phone configuration changes or if the device is rebooted.

  • Was this article helpful?