Skip to main content


8x8 Support

How to Enable and Connect to WiFi on Poly Edge E Series Devices


How to enable wifi on Poly Edge E series devices

Applies To

  • Polycom / Poly Edge E series phones with wifi


To enable Wi-Fi:

  1. Go to one of the following depending on your firmware revision
    • Menu > Wifi.
    • Menu > Settings > Basic > Wi-Fi Menu.
  2. Press the Select key to enable Wi-Fi.
  3. Press Save.
  4. Press Reboot.


To connect to Wi-Fi:

  1. Do one of the following:
    • Press the Scan softkey to scan for available networks and select the desired network to enter information as required by the networks security settings
    • Press the Other softkey to manually enter network settings, including SSID, Security type, and password.
  2. Select Connect



  • Was this article helpful?