Valcom V-2000A Overhead Paging System Configuration
To configure a Valcom V-2000A overhead paging system, ensure that Battery Feed is off. Connect 8x8 adapter to the Tip and Ring connectors. Learn more.
Objective
Configuring a Valcom V-2000A overhead paging system for 8x8 services.
Disclaimer: 8x8 is not Responsible for configuration or deployment of legacy 3rd party Paging devices, please consult the Original Equipment Manufacturer for support. 8x8 X Series does not support FXO 3rd party devices
Applies To
Valcom V-2000A overhead paging system (FXS Mode Only)
Procedure
- Ensure that the Battery Feed is on.
- In the on position this sets this as Station and or Loop Start Trunk (FXS Mode)
- Connect your 8x8 adapter to the the Tip and Ring as shown on the image below.